Copy From One Bluejay Stb To Another
How Do U Copy From One Bluejay Stb To Another
Copy Software from receiver to receiver
In order to copy the software and channel information between 2 BlueJay receivers, follow these instructions.
1. Turn the power off both receivers from the back panel
2. Connect the two receivers using a null modem cable
3. Turn the power on the "Master" receiver. Make sure the receiver is in "standby" mode. That is, the LED light on the front panel must be RED.
4. Use the front panel keys and press the following keys in this order (menu, channel up, volume up, channel down, volume down, menu)
5. You should see the message CPPG on the front panel of the "master" receiver
6. Turn the power on the "slave" receiver. The message on the master receiver will change to "STRT". A progress percentage will be displayed on the front panel of the "slave" receiver.
7. Wait until you see "GOOD" on the front panel of the "slave" receiver
__________________
"I believe in angels, the kind that heaven sends. I'm surrounded by angels, but I call them my best friends."
|
Linear Mode
