Bluejay 2 Manual Key Entry

[dptw27]

1. MAIN MENU

2. GO TO ‘Installation’ (PRESS OK)

3. GO TO ‘Edit Code’ (PRESS OK)

4. GO TO N-CODE (PRESS OK)
* N-CODE : Nagravision Code (for Dishnet and Bellvu)

5. SELECT PP (PRESS OK)
* Dishnet : 1801, Bell : 1234, Globecast : C0001
* If your current channel is on the Bellvu, the cursor bar will be automatically on the 1234 section.

6. GO TO : PP 1234, ID 01 at first (PRESS OK)
* Exercise sample
Nimiq N2 Keys (bellvu)
Key0: 82 D7 51 E4 5B 97 9D 81
Key1: 65 57 46 14 36 02 D8 DA
* Key 0 = ID 01, Key 1 = ID 11

7. MOVE TO ‘CODE’ PART (PRESS OK)


8. SELECT EACH CHARACTER BY PRESSING ‘OK’ BUTTON
* 16 characters
* Exercise Key0: 82 D7 51 E4 5B 97 9D 81

9. AFTER ENTERING 16 CHARACTERS, PRESS ‘MENU’
* By pressing MENU, the new key will be stored
* Don’t press OK or Exit button
* Exercise Key0: 82 D7 51 E4 5B 97 9D 81

10. PRESS ‘MENU’ AGAIN.
* Don’t press OK or Exit button
* Exercise Key0: 82 D7 51 E4 5B 97 9D 81

11. MOVE TO : PP 1234, ID 11
* Exercise Key1: 65 57 46 14 36 02 D8 DA

12. MOVE TO ‘CODE’ PART (PRESS OK)

13. SELECT EACH CHARACTER BY PRESSING ‘OK’ BUTTON
* 16 characters
* Exercise Key1: 65 57 46 14 36 02 D8 DA

14. AFTER ENTERING 16 CHARACTERS, PRESS ‘MENU’
* Don’t press OK or Exit button
* By pressing MENU, the new key will be stored
* Exercise Key1: 65 57 46 14 36 02 D8 DA

15. PRESS ‘MENU’ AGAIN
* Don’t press OK or Exit button

16. AFTER FINISHING BOTH NEW KEYS <KEY0 (ID01) KEY1(ID11)>, PRESS ‘MENU’ SEVERAL TIMES, THEN YOU CAN GO OUT FROM ‘EDIT CODE’. AFTER THAT, YOU CAN HAVE PICTURE AGAIN.